Use of fire- and vibration-protective mastics in railway transport

 

Skripinets Anna

M. Beketov National University of Urban Economy in Kharkiv

http://orcid.org/0000-0002-3845-8303

 

Saienko Natalia

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0003-4873-5316

 

Hryhorenko Oleksandr

National University of Civil Defenсe of Ukraine

https://orcid.org/0000-0003-4629-1010

 

Afanasenko Kostiantyn

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0003-1877-1551

 

Makarenko Olga

M. Beketov National University of Urban Economy in Kharkiv

http://orcid.org/0000-0002-4125-2365

 

DOI: https://doi.org/10.52363/2524-0226-2024-39-20

 

Keywords: epoxyurethane mastic, viscoelastic researches, damping, fire safety, toxicity, railway transport

 

Аnnotation

 

A difficult combustible epoxyurethane mastic with increased vibration-damping properties and the necessary physical and mechanical properties has been developed for lining internal metal surfaces of railway rolling stock. Epoxyurethane network polymers were used as a polymer matrix. To reduce flammability, the fire-retardant additive ammonium polyphosphate was used, and a filler with a hydrophobized surface was used to impart thixotropic properties Aerosil. Dynamic mechanical spectroscopy using a dynamic relaxometer was used as a method for studying viscoelastic properties. The study of viscoelastic properties was carried out in the ultra-low frequency range of 0.7–1.0 Hz, which minimizes the effect of external mechanical influences on changes in the structure of the polymer matrix in the temperature range from –100 to +100 °C. It has been determined that compositions based on oligester cyclo-cab modified with an epoxy diane oligomer are characterized by the best damping capacity (tgδ=0.97). It has been established that the developed mastic composition containing a fire retardant and thixotropic additive has the highest damping capacity (tgδ=0.45–0.47) in the highly elastic region; this composition can be used as a vibration-absorbing material, operable at temperatures from –60 °C up to +60 °C. It has been established that the developed mastic belongs to the group of difficult combustible materials, with slow flame propagation, moderate smoke generating ability and are moderately hazardous in terms of toxicity. The achieved level of characteristics of the difficult combustible vibration damping mastic testifies about the prospects of its further use for facing the internal metal surfaces of bodies of railway rolling stock in order to ensure their fire safety and acoustic comfort.

 

References

 

  1. 1. Raja, S., Tauseef, S. M., Abbasi, T., Abbasi, S. A. (2018). Risk of fuel spills and the transient models of spill area forecasting. Journal of Failure Analysis and Prevention, 18, 445–455. URL: doi: https://doi.org/10.1007/s11668-018-0429-1
  2. Zhang, J., Ji, W., Yuan, Z., Yuan, Y. (2023). Pyrolysis, combustion, and fire spread characteristics of the railway train carriages: A review of development. Energy and Built Environment, 4(6), 743–759. URL: doi: https://doi.org/10.1016/j.enbenv.2022.07.001
  3. Lattimer, B. Y., McKinnon, M. (2018). A review of fire growth and fully developed fires in railcars. Fire and Materials, 42(6), 603–619. URL: doi: https://doi.org/10.1002/fam.2514
  4. Irikovich, Z. O., Vyacheslavovich, R. R., Mahmod, W. (2020). Development of new polymer composite materials for the flooring of rail carriage. International Journal of Engineering & Technology, 9(2), 378–381. URL: doi: https://doi.org/10.14416/j.asep.2022.02.005
  5. Jagadeesh, P., Puttegowda, M., Rangappa, S. M., Siengchin, S. (2022). Role of polymer composites in railway sector: an overview. Applied Science and Engineering Progress, 15(2), 5745–5745. URL: doi: https://doi.org/10.14416/j.asep.2022.02.005
  6. Andronov, V. A., Bukhman, O. M., Danchenko, Yu. M., Skripinets, A. V. (2014). Efficiency of utilization of vibration-absorbing polimer coating for reducing local vibration. Naukovyy Visnyk Natsionalʹnoho Hirnychoho universytetu, 6, 85–91.
  7. Wei, Z., Xi, Z., Zhuo-fu, W. (2016). Experiment study of performances of fire detection and fire extinguishing systems in a subway train. Procedia Engineering, 135, 393–402. URL: doi: https://doi.org/10.1016/j.proeng.2016.01.147
  8. Shcholokov, E., Otrosh, Y., Rashkevich, N., Melezhyk, R. (2023). Simulation of human evacuation in case of fire using pathfinder software. Mechanics and mathematical methods, 2, 61–71 URL: doi: https://doi.org/10.31650/2618-0650-2023-5-2-61-71
  9. Skripinets, A., Saienko, N., Hryhorenko, O., Berezovskiy, A. (2020). Development and Evaluation of the Possibility of Using Epoxyurethane Mastic in Railway Transport. In Materials Science Forum, 1006, 273–281. Trans Tech Publications Ltd. URL: doi: https://www.scientific.net/MSF.1006.273
  10. Hohenwarter, D. (2016). Experience Gained from Fire Tests According to EN 45 545-2 and DIN 5510-2 for Testing of Seats. Problemy Kolejnictwa, 171, 27–38. URL: https://www.infona.pl/resource/bwmeta1.element.baztech-650169a0-2e94-41af-ac24-dd4776d03c48
  11. Saienko, N. V., Demidov, D. V., Bikov, R. A., Younis, B. N. (2019). Effect of mineral fillers on the wetting of water-based polymer dispersions. IOP Conference Series: Materials Science and Engineering, 708(1), 012103. URL: doi: https://doi.org/10.1088/1757-899X/708/1/012103
  12. Weibo, H., Fengchang, Z. (1993). Studies on the dynamic mechanical and vibration damping properties of polyether urethane and epoxy composites. Journal of applied polymer science, 50(2), 277–283. URL: doi: https://doi.org/10.1002/app.1993.070500209
  13. Plugin, A. A., Plugin, D. A., Pluhin, O. A., Borziak, O. S. (2020). The influence of the molecular structure of polyurethane on vibro- and electroinsulation properties of the tramway structures. in proceedings of cee 2019: Advances in resource-saving technologies and materials in civil and environmental engineering. Springer International Publishing, 346–353. URL: https://link.springer.com/chapter/10.1007/978-3-030-27011-7_44
  14. Skripinets, A., Saienko, N., Bikov, R., Maladyka, I., Saienko, L. (2023). Study of viscoelastic properties of epoxyurethane compositions for vibration protection of metal products. AIP Conference Proceedings, 2684(1), 040024. URL: doi: https://doi.org/10.1063/5.0133582
  15. Skrypinets, А. V., Danchenko, Yu. M., Kabus, O. V. (2015). A research on technological and physicochemical laws of manufacturing vibration-absorbing products based on epoxy-urethane polymer compositions. Eastern-European Journal of Enterprise Technologies, 3, 11(75), 4–8. URL: doi: https://doi.org/10.15587/1729-4061.2015.43324
  16. Perez, J. (1988). The study of polymer materials by mechanical spectrometry. Polymer Science, 40(1), 102–135.
  17. Roderique, J. D., Josef, C. S., Feldman, M. J., Spiess, B. D. (2015). A modern literature review of carbon monoxide poisoning theories, therapies, and potential targets for therapy advancement. Toxicology, 334, 45–58. URL: doi: https://doi.org/10.1016/j.tox.2015.05.004
  18. 18. Hampson, N. B. (2018). Carboxyhemoglobin: a primer for clinicians. Undersea Hyperb Med, 45(2), 165–171. URL: https://neilhampson.com/uploads/3/4/7/0/34704948/2018carboxyhemoglobin_primer_uhm.pdf
  19. Tabian, D., Bulgaru Iliescu, D., Iov, T., Barna, B., Toma, S. I., Drochioiu, G. (2021). Hydrogen cyanide and carboxyhemoglobin assessment in an open space fire‐related fatality. Journal of forensic sciences, 66(3), 1171–1175. URL: doi: https://doi.org/10.1111/1556-4029.14649
  20. Özdemir, A., Önder, A. (2020). An environmental life cycle comparison of various sandwich composite panels for railway passenger vehicle applications. Environ Sci Pollut Res, 27, 45076–45094. URL: doi: https://doi.org/10.1007/s11356-020-10352-8
  21. Zeltmann, S. E., Prakash, K. A., Doddamani, M., Gupta, N. (2017). Prediction of modulus at various strain rates from dynamic mechanical analysis data for polymer matrix composites. Composites Part B: Engineering, 120, 27–34. URL: doi: https://doi.org/10.1016/j.compositesb.2017.03.062
  22. Nashif, A. D., Jones, D. I. G., Henderson, J. P. (1991). Vibration damping. John Wiley & Sons, 472.
  23. Hryhorenko, O., Saienko N., Lypovyi, V., Harbuz, S. (2020). Research of effectiveness of wood fire protection by modified epoxy polymers. In Wood & Fire Safety: Proceedings of the 9th International Conference on Wood & Fire Safety, 9, 125–128. Springer International Publishing. URL: https://link.springer.com/chapter/10.1007/978-3-030-41235-7_1919–23, 2013, Lviv, Ukraine, 66–68. https://ieeexplore.ieee.org/document/6543193

 

Silicophosphate fireproof coatings for building materials

 

Lysak Nataliia

National University of Civil Defenсe of Ukraine

https://orcid.org/0000-0001-5338-4704

 

Skorodumova Olga

National University of Civil Defenсe of Ukraine

https://orcid.org/0000-0002-8962-0155

 

Chernukha Anton

National University of Civil Defenсe of Ukraine

https://orcid.org/0000-0002-0365-3205

 

Goncharenko Yana

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0002-1766-3244

 

Melezhyk Roman

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-6425-4147

 

DOI: https://doi.org/10.52363/2524-0226-2024-39-19

 

Keywords: fire-resistant coatings, building materials, liquid glass, SiO2 sol, phosphate buffer solution, fire resistance

 

Аnnotation

 

The composition of silicophosphate fire-resistant coatings for wooden building structures was developed and their properties were investigated. Fireproof compositions were obtained by mixing aqueous solutions of liquid glass and acetic acid. As a phosphate-containing additive, phosphate buffer solutions were used, which were added to the silicic acid sol in different amounts and with different ratios of the components of the buffer pair. Adjusting the ratio of the components of the buffer solution led to a change in the pH of the buffer solutions, but adding them to the sol did not change its acidity, which was in the pH range of 5.5–6. The effect of the content and ratio of the components of the buffer pair on the change in the optical density of the obtained sols over time was studied. The highest durability of the flame retardant composition was recorded when using a buffer solution with a pH of 7 at a content of 20%. The embedding of phosphate ions into the siloxane framework of experimental gels has been chemically proven, which increases their fire resistance. It is shown that the amount of free phosphate anion in the intermicellar liquid of the experimental gels is less than 5%. The mechanism of the strengthening effect of the acetate buffer solution, which is formed during the mixing of the liquid glass solution with acetic acid, on the phosphate buffer solution is proposed. Fire-retardant compositions were applied to wood samples by the bath method and dried at temperatures of 80–100 ˚С in a drying cabinet. The fire protection effect of coatings was determined during fire tests in a ceramic pipe. The effect of the content of phosphate buffer solution on the fire-retardant properties of experimental coatings was studied. It is shown that increasing the content of the phosphate buffer solution reduces mass loss during fire tests, allows to increase the fire resistance of wood and transfer it to the group of "highly flammable".

 

References

 

  1. Zhang, T., Xi, J., Qiu, S., Zhang, B., Luo, Z., Xing, W., Song, L., Hu, Y. (2021). Facilely produced highly adhered, low thermal conductivity and non-combustible coatings for fire safety. Journal of Colloid and Interface Science, 604, 378–389. https://doi.org/10.1016/j.jcis.2021.06.135
  2. Cheng, J., Zhou, F. (2016). Flame-retardant properties of sodium silicate/polyisocyanate organic–inorganic hybrid material. Journal of Thermal Analysis and Calorimetry, 125(2), 913–918. https://doi.org/10.1007/s10973-016-5454-2
  3. Zhang, Y., Guan, P., Ma, X., Li, P., Sun, Z., Li, X., Zuo, Y. (2023). Study on the Effect of acrylic acid emulsion on the properties of poplar wood modified by sodium silicate impregnation. Forests, 14(6), 1221. https://doi.org/10.3390/f14061221
  4. Mohebby, B., Hajialian, M. (2022). Stabilization of Sodium Silicate with Polyacrylate in Wood Concerning Fire Resistance. Research Square, 1–21. https://doi.org/10.21203/rs.3.rs-2147290/v1
  5. Yona, A. M. C., Žigon, J., Dahle, S., Petrič, M. (2021). Study of the adhesion of Silicate-Based coating formulations on a wood substrate. Coatings, 11(1), 61. https://doi.org/10.3390/coatings11010061
  6. Loganina, V. I., Kislitsyna, S. N., Mazhitov, Y. B. (2018). Development of sol-silicate composition for decoration of building walls. Case Studies in Construction Materials, 9, 1–7. https://doi.org/10.1016/j.cscm.2018.e00173
  7. Loganina, V. I., Mazhitov, Y. B., Skachkov, Y. P. (2019). Durability of coatings based on Sol silicate paint. Defect and Diffusion Forum, 394, 1–4. https://doi.org/10.4028/www.scientific.net/ddf.394.1
  8. He, S., Wu, W., Zhang, M., Qu, H., Xu, J. (2016). Synergistic effect of silica sol and K2CO3 on flame-retardant and thermal properties of wood. Journal of Thermal Analysis and Calorimetry, 128(2), 825–832. https://doi.org/10.1007/s10973-016-5947-z
  9. Liu, Q., Chai, Y., Lin, N., Lyu, W. (2020). Flame Retardant Properties and Thermal Decomposition Kinetics of Wood Treated with Boric Acid Modified Silica Sol. Materials, 13(20), 4478. https://doi.org/10.3390/ma13204478
  10. Skorodumova, О., Chebotareva, O., Sharshanov, A., Chernukha, A. (2023). Selection of precursors of safe silica-based fireproof coatings for textile materials. Problems of Emergency Situations, 1(37), 192–202. https://doi.org/10.52363/2524-0226-2023-37-14
  11. Skorodumova, О., Tarakhno, O., Chebotareva, O., Bajanova, K. (2022). Silicon protective coatings for textile materials based on liquid glass. Problems of Emergency Situations, 1(35), 109–119. https://doi.org/10.52363/2524-0226-2022-35-8
  12. Zhu, X., Wu, Y., Tian, C., Qing, Y., Yao, C. (2014). Synergistic Effect of Nanosilica Aerogel with Phosphorus Flame Retardants on Improving Flame Retardancy and Leaching Resistance of Wood. Journal of Nanomaterials, 2014, 1–8. https://doi.org/10.1155/2014/867106
  13. HOST 16363-98. Zasoby vohnezakhysni dlia derevyny. Metody vyznachennia vohnezakhysnykh vlastyvostei. Chynnyi z 01.09.2000. Mizhderzhavna Rada zi standartyzatsii, metrolohii i sertyfikatsii, 1998. 7.
  14. DSTU 8829:2019. Pozhezhovybukhonebezpechnist rechovyn i materialiv. Nomenklatura pokaznykiv i metody yikhnoho vyznachennia. Klasyfikatsiia. Chynnyi z 01.01.2020. Vyd. ofits. Kyiv: UkrNDNTs, 2020. 75.
  15. Lysak, N., Skorodumova, О., Chernukha, A. (2023). Development of a fire-proof coating containing silica for polystyrene. Problems of Emergency Situations, 2(38), 192–202. https://doi.org/10.52363/2524-0226-2023-38-10

 

Оperational readiness of a typical fragment of the departmental digital telecommunication network

 

Feshchenko Andreу

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0002-4869-6428

 

Zakora Аlexander

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-9042-6838

 

Sobyna Vitaliy

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-6908-8037

 

DOI: https://doi.org/10.52363/2524-0226-2024-39-17

 

Keywords: digital telecommunication network, reliability, operational availability ratio, probability of failure-free operation

 

Аnnotation

 

A probabilistic model of a typical fragment of a departmental digital telecommunications network, which takes into account the influence of the redundancy structure and operational parameters of failure and maintainability of its nodes and data transmission channels on its operational readiness ratio, was studied. A probabilistic model of the coefficient of operational readiness of a typical fragment of a digital telecommunication network after failures in an emergency situation was obtained and analyzed, and the relationship between the coefficient of operational readiness and operational parameters was established. It is indicated that the required coefficient of operational availability of a typical fragment of a digital telecommunications network is achieved not only by increasing the reliability of nodes, but also by choosing a structure of redundancy and a mode of maintenance of data transmission channels, which are not yet defined, that is why research is carried out on the dependence of the coefficient of operational readiness of a typical fragment of a departmental telecommunications network on normalized operational parameters for structures without redundancy and with redundancy of data transmission channels by the method of statistical mathematical modeling. It has been established that in order to achieve the required operational readiness ratio while reducing the requirements for the reliability of nodes of a typical fragment of a departmental digital telecommunications network, it is sufficient to apply structurally separate at least two-fold redundancy of data transmission channels, in the presence of triple redundancy of data transmission channels, the efficiency also does not increase significantly. Research data are useful for predicting the operational readiness ratio during operation and planning the required maintenance regime for nodes and data transmission channels of a typical fragment of the de-partmental telecommunications network, depending on the ratio of the period of preventive work to the recovery time for failure during operation.

 

References

 

  1. Qadir, J., Hasan, O. (2015). Applying formal methods to networking: Theory, techniques, and applications. Communications Surveys & Tutorials, 17(1), 256–291. doi: 10.1109/COMST.2014.2345792
  2. Bistouni, F., Jahanshahi, M. (2015). Pars network: a multistage interconnection network with fault-tolerance capability. Journal of Parallel and Distributed Computing, 75, 168–183. doi: 10.1016/j.jpdc.2014.08.005
  3. Wäfler, J., Heegaard, P. E. (2013). A combined structural and dynamic modelling approach for dependability analysis in smart grid, in: ACM Symposium on Applied Computing, ACM, 660–665. doi: 10.1145/2480362.2480489
  4. Bistouni, F., Jahanshahi, M. (2014). Analyzing the reliability of shuffleexchange networks using reliability block diagrams, Reliability Engineering & System Safety, 132, 97–106. doi: 10.1016/j.ress.2014.07.012
  5. Marcus, A., de Q., V., Lima, Paulo, R., M., Bruno M., Silva, Almir, P., Guimarães. (2014). Performability evaluation of emergency call center, Performance Evaluation, 80, 27–42. doi: 10.1016/j.peva.2014.07.023
  6. Ahmed, W., Hasan, O., Pervez U., Qadir, J. (2016). Reliability Modeling and Analysis of Communication Networks, Journal of Network and Computer Applications, 78, 191–215. doi: 10.1016/j.jnca.2016.11.008
  7. Todinov, M. (2013). Flow Networks. Analysis and Optimization of Repairable Flow Networks, Networks with Disturbed Flows, Static Flow Networks and Reliability Networks, Book, Oxford Brookes University, Oxford, UK, 320. Available at: https://www.
    amazon.com/Flow-Networks-Optimization-Repairable-Reliability-ebook/dp/B00BBTIXUI
  8. Sedaghatbaf, A., Abdollahi Azgomi, M. (2018) A method for dependability evaluation of software architectures. Computing, 100, 119–150. doi: 10.1007/s00607-017-0568-3
  9. Maza, S. (2014). Stochastic activity networks for performance evaluation of fault-tolerant systems, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 228(3), 243–253. doi: 10.1177/1748006X14525772
  10. Feshchenko, A., Zakora, O., Borysova, L., (2020). Rozrobka imovirnisnoyi modeli elementarnoho frahmenta vidomchoyi informatsiyno-telekomunikatsiynoyi merezhi. Problems of Emergency Situations, 1(31), 34–43. Available at: http://pes.nuczu.edu.ua/images/arhiv/31/3.pdf
  11. Feshchenko, A., Zakora, O., Borysova, L. (2021). Rozrobka imovirnisnoyi modeli typovoho frahmenta vidomchoyi tsyfrovoyi telekomunikatsiynoyi merezhi DSNS. Problems of Emergency Situations, 1(33), 222–233. doi: 10.52363/2524-0226-2021-33-17
  12. Feshchenko, A., Zakora, O., Borysova, L. (2022). Udoskonalennia imovirnisnoi modeli typovoho frahmenta vidomchoi tsyfrovoi telekomunikatsiinoi merezhi DSNS. DSNS. Problems of Emergency Situations, 1(35), 120–132. doi: 10.52363/2524-0226-2022-35-9
  13. Feshchenko, A., Zakora, O., Morshch Ye. V. Operatyvna hotovnist elementarnoho frahmentu vidomchoi tsyfrovoi telekomunikatsiinoi merezhi. DSNS. Problems of Emergency Situations, 1(37), 44–56. doi: 10.52363/2524-0226-2023-37-4

 

Аssessment of the influence of air humidity on the explosion and fire hazard of premises with combustible dust

 

Roianov Oleksii

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-7631-1030

 

Katunin Albert

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0003-2171-4558

 

Kulakov Oleg

National University of Civil Defenсe of Ukraine

https://orcid.org/0000-0001-5236-1949

 

Bogatov Oleg

Kharkiv National Automobile and Highway University

http://orcid.org/0000-0001-7342-7556

 

DOI: https://doi.org/10.52363/2524-0226-2024-39-18

 

Keywords: explosion and fire hazard, overpressure of explosion, flammable dust, explosion dust, category of premises according to fire and explosion hazard

 

Аnnotation

 

Estimated explosion pressure of the dust-air mixture in the industrial premises was evaluated taking into account air humidity to determine the category of the premises according to explosion and fire hazard. The study presents data that demonstrate the presence of water vapor in the air and reflect its sensitivity to ambient temperature. During the research, the calculation of the overpressure of the explosion in the working room and equipment with a dust-air mixture was carried out. At the same time, a hypothesis was put forward regarding the influence of humidity in the room with dust-air mixtures on the obtained value of the calculated overpressure of the explosion. The error with which this value will be determined, in turn, can lead to the adoption of a wrong decision regarding the specified category of the premises in terms of explosion and fire hazard. In order to test the proposed hypothesis, calculations were carried out for two cases – without taking into account and taking into account the humidity in the air of the surrounding environment. The input values for the calculations were chosen in accordance with the requirements for ensuring environmental parameters in industrial premises with dust-air mixtures. The results obtained during the research confirmed the proposed hypothesis regarding the influ-ence of humidity on the value of the calculated overpressure of the explosion. The influence of humidity in the environment on the accuracy of the obtained value of the calculated excess pressure is a recognized fact and requires additional research. The results of the estimates obtained during the study confirm the need to take into account the influence of the humidity of the environment in the production room on the calculated value of the excess pressure of the explosion. Based on the results of these calculations, a conclusion is made regarding the belonging of a room with a dust-air mixture to a certain category in terms of explosion-fire hazard, as well as the need to take precautionary measures to reduce the fire-explosion hazard of environments in industrial premises.

 

References

 

  1. DSTU B V.1.1–36:2016. Vyznachennia katehorii prymishchen, budynkiv ta zovnishnikh ustanovok za vybukhopozhezhnoiu ta pozhezhnoiu nebezpekoiu, 31. Available at: https://zakon.rada.gov.ua/rada/show/v0158858–16#Text
  2. The Confederation of Fire Protection Associations Europe (CFPA–Europe). (2022). Available at: https://cfpa–e.eu/
  3. National Fire Protection Association (NFPA). (2022). Available at: https://www.nfpa.org
  4. British Standards Institution (BSI). (2022). Available at: https://www.bsigroup.com/
  5. NFPA 68. (2002). Guide for Venting of Deflagrations. Available at: https://www.nfpa.org/codes–and–standards/all–codes–and–standards/list–of–codes–and–standards/detail?code=68
  6. Policy on Fire Protection Rules Available at: https://www.euspa.europa.eu/
    sites/default/files/policy_on_fire_protection_rules.pdf
  7. Darie, M., Burian, S., Ionescu, J., Csaszar, T., Moldovan, L., Colda, C., Andriş, A. (2014). Air humidity – a significant factor on ignition sensitivity of gaseous explosive atmospheres. Proc. The Xth Environmental legislation, safety engineering and disaster management, Cluj–Napoca, Romania. 47. Available at: https://www.researchgate.
    net/publication/272158810_AIR_HUMIDITY_–_A_SIGNIFICANT_FACTOR_ON_
    IGNITION_SENSITIVITY_OF_GASEOUS_EXPLOSIVE_ATMOSPHERES
  8. Darie, M., Burian, S., Csaszar, T., Moldovan, L., Moldovan, C. (2017). New aspects regarding ignition sensitivity of air–methane mixtures Environmental Engineering and Management Journal, Romania. June 2017, 16, 6, 1263–1267. Available at: https://www.researchgate.net/profile/Doru–Cioclea/publication/319523058_Method_
    for_improving_the_management_of_mine_ventilation_networks_after_an_explosion/links/5b17c994aca272021ce9153b/Method–for–improving–the–management–of–mine–ventilation–networks–after–an–explosion.pdf#page=25
  9. Khudhur, D. A., Ali, M. W., Abdullah, T. A. T. (2020). Mechanisms, Severity and Ignitability Factors, Explosibility Testing Method, Explosion Severity Characteristics, and Damage Control for Dust Explosion: A Concise Review. Journal of Physics: Conference Series. «International laser technology and optics symposium in conjunction with photonics meeting 2020» (ILATOSPM), 22–23 October 2020, Malaysia, Johor. doi:10.1088/1742–6596/1892/1/012023.
  10. Kostenko, V., Liashok, Y., Zavialova, O., Pozdieiev, S., Kostenko, T. (2020). The deformation dynamics of the experimental adit’s material during a coal dust explosion. Eastern-European Journal of Enterprise Technologies, 4, 7–106, 54–62. doi: 10.15587/1729-4061.2020.209409
  11. Roianov, O., Katunin, A., Melezhyk, R., Bogatov, O. (2022). Evaluation of the influence of air humidity on the calculated explosion overpressure. Problems of Emergency Situations, 2(36), 312–324. Available at: http://repositsc.nuczu.edu.ua/handle/
    123456789/17442
  12. Shun‑Chieh Chang, Yu‑Chi Cheng, Xin‑Hai Zhang, Chi‑Min Shu. (2021). Efects of moisture content on explosion characteristics of incense dust in incense factory. Journal of Thermal Analysis and Calorimetry. Available at: https://d-nb.info/123260920X/34

 

Features of the average bihoherentity of the dynamics of the parameters of the gas environment at the appearance of fire

 

Pospelov Boris

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0002-0957-3839

 

Rybka Evgeniy

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0002-5396-5151

 

Meleshchenko Ruslan

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-5411-2030

 

Bezuhla Yuliiа

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0003-4022-2807

 

Yashchenko Oleksandr

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-7129-389X

 

Borodych Pavlo

National University of Civil Defenсe of Ukraine

http://orcid.org/0000-0001-9933-8498

 

DOI: https://doi.org/10.52363/2524-0226-2024-39-16

 

Keywords: measure, average bicoherence, change of dangerous parameters, gas medium, ignition of material

 

Аnnotation

 

The object of the study is the dangerous parameters of the gas environment during the ignition of materials in the premises. The importance of such research is related to the possibility of using the average bicoherence measure to detect fires and prevent emergency situations due to fire. The measure of the average bicoherence of arbitrary dangerous parameters of the gas environment on a free time interval is substantiated. Experimentally studied features of the average bicoherence measure of the frequency components of the spectrum of the main dangerous parameters of the gas environment in the model chamber at the intervals of reliable absence and presence of ignition of typical ignition materials. The results show that the dynamics of the dangerous parameters of the gas environment in the chamber at the intervals of the absence and presence of fires has a complex non-linear nature. It was established that the difference in the average bicoherence measure for the frequency components in the spectrum of changes in the hazardous parameters of the gas environment in the presence and absence of fires has a different and individual character. It is noted that the individual characteristics of the average bicoherence measure can act as a possible sign for the detection of fires. It was found that the maximum value of the measure equal to 1.0 for all frequency indices occurs before the ignition of alcohol and paper. Before the ignition of wood and textiles, the values of the frequency index measures are random and range from 0.4 to 0.8. It was established that the ignition of materials leads to the loss of the initial third-order relationships between the frequency components in the spectra. This makes it possible to consider the specified loss of connections as a general sign of fire detection by calculating the proposed measure of average bicoherence of hazardous parameters of the gas environment in the premises.

 

References

 

  1. Vambol, S., Vambol, V., Sychikova, Y., Deyneko, N. (2017). Analysis of the ways to provide ecological safety for the products of nanotechnologies throughout their life cycle. Eastern-European Journal of Enterprise Technologies, 1(10(85)), 27–36. doi: 10.15587/1729-4061.2017.85847
  2. Semko, A., Rusanova, O., Kazak, O., Beskrovnaya, M., Vinogradov, S., Gricina, I. (2015). The use of pulsed high-speed liquid jet for putting out gas blow-out. The International Journal of Multiphysics, 9(1), 9–20. doi: 10.1260/1750-9548.9.1.9
  3. Popov, O., Іatsyshyn, A., Kovach, V., Artemchuk, V., Taraduda, D., Sobyna, V. et al. (2018). Conceptual Approaches for Development of Informational and Analytical Expert System for Assessing the NPP impact on the Environment. Nuclear and Radiation Safety, 3(79), 56–65. doi: 10.32918/nrs.2018.3(79).09
  4. Pospelov, B., Andronov, V., Rybka, E., Popov, V., Semkiv, O. (2018). Devel-opment of the method of frequencytemporal representation of fluctuations of gaseous medium parameters at fire. Eastern-European Journal of Enterprise Technologies, 2(10(92)), 44–49. doi: 10.15587/1729-4061.2018.125926
  5. Dubinin, D., Korytchenko, K., Lisnyak, A., Hrytsyna, I., Trigub, V. (2017). Numerical simulation of the creation of a fire fighting barrier using an explosion of a combustible charge. Eastern-European Journal of Enterprise Technologies, 6(10(90)), 11–16. doi: 10.15587/1729-4061.2017.114504
  6. Popov, O., Iatsyshyn, A., Kovach, V., Artemchuk, V., Taraduda, D., Sobyna, V., Sokolov, D., Dement, M., Hurkovskyi, V., Nikolaiev, K., Yatsyshyn T., Dimitriieva, D. (2019). Physical features of pollutants spread in the air during the emergency at NPPs. Nuclear and Radiation Safety, 4/84, 11. doi: 10.32918/nrs.2019.4(84).11
  7. Vambol, V., Vambol, S., Kondratenko, O., Koloskov, V., Suchikova, Y. (2018). Substantiation of expedience of application of high-temperature utilization of used tires for liquefied methane production. Journal of Achievements in Materials and Manufacturing Engineering, 87(2), 77–84. doi: 10.5604/01.3001.0012.2830
  8. Dubinin, D., Korytchenko, K., Lisnyak, A., Hrytsyna, I., Trigub, V. (2018). Improving the installation for fire extinguishing with finelydispersed water. Eastern-European Journal of Enterprise Technologies, 2(10(92)), 38–43. doi: 10.15587/1729-4061.2018.127865
  9. Otrosh, Y., Rybka, Y., Danilin, O., Zhuravskyi, M. (2019). Assessment of the technical state and the possibility of its control for the further safe operation of building structures of mining facilities. E3S Web of Conferences, 123, 01012. doi: 10.1051/e3sconf/201912301012
  10. Ragimov, S., Sobyna, V., Vambol, S., Vambol, V., Feshchenko, A., Zakora, A., Strejekurov, E., Shalomov, V. (2018). Physical modelling of changes in the energy impact on a worker taking into account high-temperature radiation. Journal of Achievements in Materials and Manufacturing Engineering, 91, 1, 27–33. doi: 10.5604/01.3001.0012.9654
  11. Pospelov, B., Andronov, V., Rybka, E., Krainiukov, O., Maksymenko, N., Meleshchenko, R. et al. (2020). Mathematical model of determining a risk to the human health along with the detection of hazardous states of urban atmosphere pollution based on measuring the current concentrations of pollutants. Eastern-European Journal of Enterprise Technologies, 4(10(106)), 37–44. doi: 10.15587/1729-4061.2020.210059
  12. Otrosh, Yu., Semkiv, O., Rybka, E., Kovalov, A. (2019). About need of calcu-lations for the steel framework building in temperature influences conditions. IOP Conference Series: Materials Science and Engineering, 708, 1, 012065. doi: 10.1088/1757-899x/708/1/012065
  13. Vambol, S., Vambol, V., Kondratenko, O., Suchikova, Y., Hurenko, O. (2017). Assessment of improvement of ecological safety of power plants by arranging the system of pollutant neutralization. Eastern-European Journal of Enterprise Technol-ogies, 3/10(87), 63–73. doi: 10.15587/1729-4061.2017.102314
  14. Rybalova, O., Artemiev, S., Sarapina, M., Tsymbal, B., Bakharevа, A., Shestopalov, O., Filenko, O. (2018). Development of methods for estimating the envi-ronmental risk of degradation of the surface water state. Eastern-European Journal of Enterprise Technologies, 2(10(92)), 4–17. doi: 10.15587/1729-4061.2018.127829
  15. World Fire Statistics. (2022). № 27. CTIF, 65. Available at: https://www.ctif.org/sites/default/files/2022-08/CTIF_Report27_ESG.pdf
  16. Kovalov, A., Otrosh, Y., Rybka, E., Kovalevska, T., Togobytska, V., Rolin, I. (2020). Treatment of Determination Method for Strength Characteristics of Reinforcing Steel by Using Thread Cutting Method after Temperature Influence. Materials Science Forum, 1006, 179–184. doi: 10.4028/www.scientific.net/msf.1006.179
  17. Pospelov, B., Andronov, V., Rybka, E., Samoilov, M., Krainiukov, O., Biryukov, I., Butenko, T., Bezuhla, Yu., Karpets, K., Kochanov, E. (2021). Develop-ment of the method of operational forecasting of fire in the premises of objects under real conditions. Eastern-European Journal of Enterprise Technologies, 2/10(110), 43–50. doi: 10.15587/1729-4061.2021.226692
  18. Andronov, V., Pospelov, B., Rybka, E. (2017). Development of a method to improve the performance speed of maximal fire detectors. Eastern-European Journal of Enterprise Technologies, 2(9(86)), 32–37. doi: 10.15587/1729-4061.2017.96694
  19. Pospelov, B., Andronov, V., Rybka, E., Skliarov, S. (2017). Research into dy-namics of setting the threshold and a probability of ignition detection by self­adjusting fire detectors. Eastern-European Journal of Enterprise Technologies, 5/9(89), 43–48. doi: 10.15587/1729-4061.2017.110092
  20. Cheng, C., Sun, F., Zhou, X. (2011). One fire detection method using neural networks. Tsinghua Science and Technology, 16(1), 31–35. doi: 10.1016/s1007-0214(11)70005-0
  21. Ding, Q., Peng, Z., Liu, T., Tong, Q. (2014). Multi-Sensor Building Fire Alarm System with Information Fusion Technology Based on D-S Evidence Theory. Algo-rithms, 7(4), 523–537. doi: 10.3390/a7040523
  22. Wu, Y., Harada, T. (2004). Study on the Burning Behaviour of Plantation Wood. Scientia Silvae Sinicae, 40, 131–136.
  23. Ji, J., Yang, L., Fan, W. (2003). Experimental Study on Effects of Burning Behaviours of Materials Caused by External Heat Radiation. Journal of Combustion Science and Technology, 9, 139.
  24. Peng, X., Liu, S., Lu, G. (2005). Experimental Analysis on Heat Release Rate of Materials. Journal of Chongqing University, 28, 122.
  25. Pospelov, B., Andronov, V., Rybka, E., Meleshchenko, R., Gornostal, S. (2018). Analysis of correlation dimensionality of the state of a gas medium at early ignition of materials. Eastern-European Journal of Enterprise Technologies, 5/10(95), 25–30. doi: 10.15587/1729-4061.2018.142995
  26. Pospelov, B., Andronov, V., Rybka, E., Meleshchenko, R., Borodych, P. (2018). Studying the recurrent diagrams of carbon monoxide concentration at early ignitions in premises. Eastern-European Journal of Enterprise, 3/9(93), 34–40. doi: 10.15587/1729-4061.2018.133127
  27. Pospelov, B., Rybka, E., Meleshchenko, R., Krainiukov, O., Biryukov, I., Butenko, T., Yashchenko, O., Bezuhla, Yu., Karpets, K., Vasylchenko, R. (2021). Short-term fire forecast based on air state gain recurrency and zero-order Brown model. Eastern-European Journal of Enterprise, 3/10(111), 27–33. doi: 10.15587/1729-4061.2021.233606
  28. Pospelov, B., Rybka, E., Krainiukov, O., Yashchenko, O., Bezuhla, Y., Bielai, S., Kochanov, E., Hryshko, S., Poltavski, E., Nepsha, O. (2021). Short-term forecast of fire in the premises based on modification of the Brown’s zero-order model. Eastern-European Journal of Enterprise Technologies, 4/10(112), 52–58. doi: 10.15587/1729-4061.2021.238555
  29. Pospelov, B., Rybka, E., Togobytska, V., Meleshchenko, R., Danchenko, Yu. (2019). Construction of the method for semi-adaptive threshold scaling transformation when computing recurrent plots. Eastern-European Journal of Enterprise Technologies, 4/10(100), 22–29. doi: 10.15587/1729-4061.2019.176579
  30. Pospelov, B., Andronov, V., Rybka, E., Krainiukov, O., Karpets, K., Pirohov, O., Semenyshyna, I., Kapitan, R, Promska, A., Horbov, O. (2019). Development of the correlation method for operative detection of recurrent states. Eastern-European Journal of Enterprise, 6/4(102), 39–46. doi: 10.15587/1729-4061.2019.187252
  31. Sadkovyi, V., Pospelov, B., Andronov, V., Rybka, E., Krainiukov, O., Rud, А., Karpets, K., Bezuhla, Yu. (2020). Construction of a method for detecting arbitrary hazard pollutants in the atmospheric air based on the structural function of the current pollutant concentrations. Eastern-European Journal of Enterprise, 6/10(108), 14–22. doi: 10.15587/1729-4061.2020.218714
  32. Pospelov, B., Rybka, E., Meleshchenko, R., Krainiukov, O., Harbuz, S., Bezuhla, Y. et al. (2020). Use of uncertainty function for identification of hazardous states of atmospheric pollution vector. Eastern-European Journal of Enterprise Tech-nologies, 2(10(104)), 6–12. doi: 10.15587/1729-4061.2020.200140
  33. Floyd, J., Forney, G., Hostikka, S., Korhonen, T., McDermott, R., McGrattan, K. (2013). Fire Dynamics Simulator (Version 6) User’s Guide, 1. National Insti-tute of Standard and Technology.
  34. Polstiankin, R. M., Pospelov, B. B. (2015). Stochastic models of hazardous factors and parameters of a fire in the premises. Problemy pozharnoy bezopasnosti, 38, 130–135. Available at: http://nbuv.gov.ua/UJRN/Ppb_2015_38_24
  35. Heskestad, G., Newman, J. S. (1992). Fire detection using cross-correlations of sensor signals. Fire Safety Journal, 18(4), 355–374. doi: 10.1016/0379-7112(92)90024-7
  36. Gottuk, D. T., Wright, M. T., Wong, J. T., Pham, H. V., Rose-Pehrsson, S. L., Hart, S., Hammond, M., Williams, F. W., Tatem, P. A., Street, T. T. (2002). Prototype Early Warning Fire Detection Systems: Test Series 4 Results. NRL/MR/6180–02–8602, Naval Research Laboratory.
  37. Pospelov, B., Andronov, V., Rybka, E., Bezuhla, Y., Liashevska, O., Butenko, T., Darmofal, E., Hryshko, S., Kozynska, I., Bielashov, Y. (2022). Empirical cumulative distribution function of the characteristic sign of the gas environment during fire. Eastern-European Journal of Enterprise Technologies, 4(10(118)), 60–66. doi: 10.15587/1729-4061.2022.263194
  38. Pospelov, B., Rybka, E., Savchenko, A., Dashkovska, O., Harbuz, S., Naden, E. et al. (2022). Peculiarities of amplitude spectra of the third order for the early detection of indoor fires. Eastern-European Journal of Enterprise Technologies, 5(10(119)), 49–56. doi: 10.15587/1729-4061.2022.265781
  39. Pospelov, B., Bezuhla, Y., Yashchenko, O., Khalmuradov, B., Petukhova, O., Gornostal, S. et al. (2022). Revealing the features of the third order phase spectrum of the main dangerous parameters of the gas medium. Eastern-European Journal of Enter-prise Technologies, 6(10(120)), 63–70. doi: 10.15587/1729-4061.2022.268437
  40. Pasport. Spovishchuvach pozhezhnyi teplovyi tochkovyi. Arton. Available at: https://ua.arton.com.ua/files/passports/%D0%A2%D0%9F%D0%A2-4_UA.pdf
  41. Pasport. Spovishchuvach pozhezhnyi dymovyi tochkovyi optychnyi. Arton. Available at: https://ua.arton.com.ua/files/passports/spd-32_new_pas_ua.pdf
  42. Optical/Heat Multisensor Detector (2019). Discovery. Available at: https://www.nsc-hellas.gr/pdf/APOLLO/discovery/B02704-00%20Discovery%20Multisensor%20Heat-%20Optical.pdf
  43. Saeed, M., Alfatih, S. (2013). Nonlinearity detection in hydraulic machines utilizing bispectral analysis. TJ Mechanical engineering and machinery, 13–21.
  44. Yang, K., Zhang, R., Chen, S., Zhang, F., Yang, J., Zhang, X. (2015). Series Arc Fault Detection Algorithm Based on Autoregressive Bispectrum Analysis. Algorithms, 8, 929–950. doi: 10.3390/a8040929
  45. Chua, K. C., Chandran, V., Acharya, U. R., Lim, C. M. (2010). Application of higher order statistics/spectra in biomedical signals – Areview. Medical Engineering & Physics, 32(7), 679–689. doi: 10.1016/j.medengphy.2010.04.009
  46. Chua, K. C., Chandran, V., Acharya, U. R., Lim, C. M. (2008). Cardiac state diagnosis using higher order spectra of heart rate variability. Journal of Medical Engi-neering & Technology, 32(2), 145–155. doi: 10.1080/03091900601050862
  47. Cui, L., Xu, H., Ge, J., Cao, M., Xu, Y., Xu, W., Sumarac, D. (2021). Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack. Sensors., 21, 1177. doi: 10.3390/s21041177
  48. Martín-Montero, A., Gutiérrez-Tobal, G. C., Kheirandish-Gozal, L., Jiménez-García, J., Álvarez, D., del Campo, F. et al. (2020). Heart rate variability spectrum characteristics in children with sleep apnea. Pediatric Research, 89(7), 1771–1779. doi: 10.1038/s41390-020-01138-2
  49. Max, J. (1981). Principes generaus et methods classiques. Tome 1. Paris New York Barselone Milan Mexico Rio de Janeiro, 311.
  50. Mohankumar, K. (2015). Implementation of an underwater target classifier using higher order spectral features. Cochin. Available at: https://dyuthi.cusat.ac.in/xmlui/bitstream/handle/purl/5368/T-2396.pdf?sequence=1